Heater which material heat is better?

Carbon crystal heating panel

Carbon crystal heating panel is made by adding far-infrared emitting agent and temperature limiting agent into microcrystalline particles with special technology and techniques. When working, the alternating electric field is generated under the action of alternating current, and the carbon atoms in the carbon crystal rub and collide with each other to do Brownian motion, thus generating a large amount of heat. The heat is mainly distributed in the form of far-infrared radiation energy of 8-14 microns and heat conduction heat energy, with an effective electric heat conversion rate of over 98%.

When heating, the whole heating plate plane heats up synchronously, continuous heating, good heat balance effect, high heat conversion rate, commonly used in home heating, office heating and other large space heating. Features: long service life, long-term use of power without decay, no noise, environmental protection, not dry (release far infrared rays, do not take away the moisture in the air).

Ceramic heating element

Ceramic heating element is a heating element that is directly printed on the raw alumina ceramic with resistance paste, baked at high temperature, and cured and sintered together after electrode and lead processing. It is a new generation of medium and low temperature heating element, which is a new product after alloy electric heating wire and PTC heating element.

Commonly used in heaters, hair dryers, clothes dryers, irons, soldering irons, hair straighteners, curling irons, etc. Features: simple structure, high power density, high thermal efficiency, uniform heating and energy saving, no open flame, long life. Disadvantages: ceramic heating speed is slow.

Nickel-chromium wire

Nickel-chromium wire is mainly composed of nickel and chromium and has a filamentary shape. Its main feature is high temperature strength, is an electric resistance alloy, often used as a resistance element. Commonly used in: electric furnace, electric iron, electric iron, electric heaters and other electric heating elements.

Mica heating plate

The mica heating plate is made of mica board with good insulation and high temperature resistance. With mica board as the skeleton and insulation layer, plus galvanized sheet or stainless steel plate for support and protection, it can be made into various shapes of heating elements. It can be designed with power up to 1000W and can withstand high temperature up to 600℃. Features are: light weight, thin thickness, small volume and high power. Commonly used in rice cookers, microwave ovens, disinfection cabinets, hair dryers, electric irons.

Quartz tube

Quartz tube is a special industrial glass made of silica, commonly used in electric fire bucket, electric fireplace, heater as a heating element. Features: good thermal stability, disadvantages: fragile, luminous, with light pollution.

Safety, power saving, comfort these three perspectives on the above materials, a comprehensive view of carbon crystal heating plate, mica heating film is the more ideal heating materials. In contrast, ceramic heating pad, nichrome wire, quartz tube these three are relatively early, each with their own limitations.