Common problems and solutions during the production of mica tape

Mica tape production often encounters a variety of problems, today I would like to organize a few common problems and solutions for you.

1, the pitch does not meet the regulations, may be caused by traction too fast or too slow, can be resolved by adjusting the traction line speed;.

2, excessive twist, the reason is that traction slippage line tension is not enough, by adjusting the line tension to solve.

3, broken belt, is due to the winding belt does not meet the requirements or the belt is too tight, by replacing the belt to adjust the belt tension to solve the problem of broken belt.

4、Band breakage after spooling, due to the single line of mica scraping each other caused by the broken belt phenomenon, can be adjusted by adjusting the line spool or take protective measures to solve the broken belt after spooling.

5、Other problems caused by human factors.